Magnetic grabber for scent cans is a simple but super useful tool for pulling small Fluonose cans from tight spots, deep channels, and hard-to-reach crevices.
One end has a strong magnet embedded in the material, while the other is shaped into a practical hook for "scooping" cans hidden behind furniture, televisions, or license plates.
An ideal addition for working with Fluonose Nano+ and Fluonose Flat cans, as well as modules like the Scent Hedgehog in the FluoNora system.
It may seem like a trifle, but after a few training sessions, you start to wonder how you could have lived without it before. The Magnetic Scent Can Grabber was created to quickly and conveniently pull small scent cans from places that are simply out of reach for your fingers.
This tool will be particularly useful for those working with miniature scent containers, such as Fluonose Nano+ or Fluonose Flat. Such cans work great in difficult, precise hides, but they have one natural feature: when they fall deep into a tube, crevice, or nook, retrieving them can be a hassle. And this is where this white hero of special tasks comes in 🧲
At the end of the longer part of the grabber, there is a strong magnet that is completely embedded in the material. This means it does not protrude, does not snag on training elements, and has no direct contact with dirt.
In practice, this means you just need to slide the end of the grabber into the channel, tube, or opening, bring it close to the can, and calmly pull the container out without shaking the entire module. This is especially evident when working with the Scent Hedgehog, where the Nano+ can may fall into one of the narrow channels.
If you train nosework at home, in the car, in the training hall, or outdoors, you probably know that moment: the scent can is perfectly hidden, the dog has beautifully found it, the training was successful… and now you need to somehow get it out. The problem starts when the container is sitting deep in a channel, behind a piece of furniture, in a gap between elements, behind the TV, behind the wardrobe, or somewhere near the car's license plate.
Of course, you can improvise. You can shake the module, tilt it upside down, look for a stick, try to pull the can out with your fingernail, or dismantle part of the hide. But why do that when it can be done more simply? The Magnetic Scent Can Grabber allows you to quickly, cleanly, and without demolishing the entire training scene retrieve a small container.
One of the best examples of using the grabber is the Scent Hedgehog – a module for the FluoNora system that has many scent channels in the form of narrow tubes. After dropping a small can, such as the Nano+, into such a channel, it is often unreachable by fingers.
Without the grabber, you would have to turn the entire Hedgehog upside down and hope that the can falls out on its own. With the grabber, you just slide the magnetic tip into the channel, catch the can with the magnet, and pull it out without dismantling the entire structure.
This grabber is not just a simple stick with a magnet. It has been designed to solve the two most common problems when retrieving small scent cans.
The first problem is a can hidden deep in an opening, channel, or tube. Here, the magnetic tip comes into play. You just need to bring it close to the can, and the magnet helps attract it and calmly pull it out. This is particularly useful when working with modules where the channels are too narrow for fingers.
The second problem is a can wedged in a flat crevice, such as behind a piece of furniture, behind the TV, under a piece of equipment, or behind a car's license plate. In such situations, the other end of the grabber, the shaped hook, works great. You can slide it into the crevice and "scoop" the container towards you instead of trying to catch it blindly with your fingers.
The hooked end is useful when the can is not lying in a deep channel but has been wedged into a crevice. Good examples are hides behind a wardrobe, behind a TV, under a baseboard, behind a piece of equipment, or behind a car's license plate.
In such places, the strength of the magnet is not always the most convenient solution, as sometimes you first need to move the container towards you. The hook allows you to gently snag the can and pull it out from a place where it would be difficult to retrieve it with fingers.
The grabber is made from PETG. This is important because in nosework accessories, it’s not just about durability. It also matters that the equipment is easy to keep clean and does not become an accidental carrier of odors after a few training sessions.
PETG does not absorb odors like porous materials, so after training, the grabber can simply be washed in warm water with detergent. This is especially useful if you use it in various environments: once at home, once in the car, another time in the training hall, or outdoors.
The grabber is relatively stiff, making it easy to maneuver in narrow channels and crevices. At the same time, it has a slight flexibility, so it does not feel like a brittle, fragile element. It’s just a small, practical tool designed to do one thing: help retrieve a can without stress.
| Parameter | Value |
|---|---|
| Length | 150 mm |
| Width | 40 mm |
| Thickness | 6 mm |
| Color | White |
| Material | PETG |
| Compatibility | Small scent cans, especially Fluonose Nano+ and Fluonose Flat |
This product is for those who like to create thoughtful, interesting, and somewhat more technical scent hides. It will be particularly useful for nosework trainers, instructors, dog schools, and anyone using small cans in hard-to-reach places.
If you only work with large, visible containers lying on the floor, you probably won't need it for every training session. But if you use Nano+, Flats, FluoNora modules, crevices, channels, tubes, object props, or hides in the car, then this grabber can quickly become one of those small accessories that are always at hand.
The biggest advantage is that it saves time and nerves. You don’t have to dismantle the hide, shake the entire module, or improvise with random sticks. You simply take the grabber, slide it into the right place, and retrieve the can. Simple, clean, and convenient.
The Magnetic Scent Can Grabber is a small addition that solves a very specific problem. It doesn’t make noise, doesn’t light up, doesn’t have an app, doesn’t require charging, and doesn’t pretend to change your entire training life. But when a Nano+ can falls deep into the channel of the Scent Hedgehog or a Flat hides behind an element that you can’t fit your fingers into, this unassuming white grabber suddenly becomes absolutely brilliant.
Brak opinii o tym produkcie.
lock Zaloguj się, aby napisać pierwszą opinię
check_circle
check_circle
